|
Single Channel Analyzer Setup
On the four Single Channel Analyze channels
the upper discriminator levels must be set above the
lower levels for each of the four channels
Contact Closure Outputs may
be Active Open,
Active Closed, or Inactive.
A DAS command attempting to open or close an
inactive output is logged as a configuration
error. The Style may be
Follow Command (no timer),
Restart Timer (time is
restarted if another activation while still
active), and Ignore Overlap
(existing timer expires as scheduled).
Contact Closure Inputs, if
set to Do Trigger, will
cause the configured trigger to occur. See
the Trigger page to
configure one or more triggers.
More...
|