Firmware Version:   

General
Setup
Universal Non-Destructive Assay Data Acquisition Platform  UNAP
   
Status File
Management		 General
Setup		 Data
Setup		 Time &
Communications
General

 

 Data Select

 

 Security

 

 Credits
Identification
Instrument ID:
    Facility Long Name:
    Facility Short Name:
Operations
Run Time:
  0.1 to 1,000,000 seconds.
  Resolution is 1/10 second.
Totals And SCA Sampling Rate:   Samples per Run Time period.
Acquisition Mode:
General
High Voltage High Voltage 0:
Volts (-2000 to +2000)
High Voltage 1:
Volts (-2000 to +2000)
Files and File Data Auto Delete on Copy:
Files to delete when storage is full:
Add Information to Data Files: SOH: LOG:
Automatic File Transfer to DAS: at : :   hrs:min:sec
Automatic Save SOH information: at : :   hrs:min:sec
DAS
    Protocol:    
DAS Pull Data On DAS Request
Dump to DAS Size:		   Maximum Number of Elements per Request.
UNAP Push Data Push Data to DAS:   Overrides Dump to DAS if set to YES.
  General Setup

Instrument ID is used to identify the specific instrument in a facility. The ID coupled with the Facility Short Name will be used to create file names.

The Run Time and Acquisition Mode set the acquisition duration and the single or multiple acquisition option.

Totals and SCA sampling are in samples per Run Time period. A setting of 1 sample means a single sample for the acquisition period. A setting of 4 means sub-sample at 1/4 through the Run Time Period, 1/2 through the Run Time Period, 3/4 through the Run Time Period, and finally at the end of the Run Time Period.

Caution should be used when setting the Auto Delete on Copy. Once a file has been deleted it is no longer available to be resent to the DAS or to be copied.

More... 		 
Software by...
    Pelowitz, LLC		          
   and
    Foiani, LLC