UNAP Graph Data Help
In the Graph Data screen, the user may select and graph selected data values. Up to four data items may be placed on a single graph. All of the histograms will be graphed independently and are not part of the up-to-four-item limitation. The Save on this page simply tells the UNAP which checkboxes will default to "checked" when the page is loaded.
Data Sources
|
Multiplicity SR-0, |
R+A is Reals plus Accidentals, Totals are the shift register totals. The Reals are computed by subtracting the Accidentals from the Reals plus Accidentals. The R+A Hist is the Reals plus Accidentals multiplicity histogram. The A Hist is the Accidentals' only multiplicity histogram. |
| Totals Channels 0 - 7 | Totals are the total counts per acquisition cycle for each of the eight totals counters. |
| DCM Channels 0 - 1 |
The two DCM channels are the Dual Current Mode values expressed
in the current average for the collection period. |
| SCA Channels 0 - 3 |
The four SCA channels are the Single Channel Analyzer counts for
the collection period. |
| ADC Channel |
The ADC channel is the Analog to Digital Converter voltage
output for each collection period. |
| 4 - 20 mAmp Channel |
The 4 - 20 mAmp channel is the current measurement at the end of
each collection period. |
|
Contact Closures
In 0 - 3 |
The Contact Closures In are the four input contact closure
inputs. |
|
Contact Closures
Out 0 - 3 |
The Contract Closures Out are the four output contact closure
outputs. |
Status Sources
| Bias Supply Voltage | The bias voltage is 0 to 600 volts. |
|
HV Supply 0 - 1 |
The two HV outputs are individually set and may be -2000 to +2000 volts. |
|
+ / - 5 Volt |
The 5 volt supplies are used to power some of the electronics in the UNAP. |
|
+ / - 12 Volt |
The two 12 volt supplies are used to power some of the electronics in the UNAP. |
| + 3.3 Volts | The 3.3 volt supply is used to power some of the electronics in the UNAP. |
| Input Voltage | The Input Voltage is the external power supply's output as measured at the input to the UNAP. |
| Total Current Draw | The Total Current Draw is the amperage being drawn by the UNAP. |
| Battery Level | Expressed in percentage, this is the current charge of the battery system. |
| Processor Temp (F) | Temperature on the CPU board expressed in degrees Fahrenheit. |
| Processor Temp (C) | Temperature on the CPU board expressed in degrees Celsius. |